Canon EOS 1D Battery Replacement

  • Buy 2 for $55.70 each and save 1%
  • Buy 3 for $55.43 each and save 1%
  • Buy 5 for $55.14 each and save 2%
  • Buy 10 for $54.87 each and save 2%
  • Buy 20 for $54.31 each and save 3%
  • Buy 50 for $53.75 each and save 4%
  • Buy 100 for $53.19 each and save 5%

In stock and ready to ship

lock-closed Secure Transaction
Close

Our shopping cart is secured by 256-bit SSL encryption, the same level of encryption used by websites such as PayPal, Amazon, and all the major banks.

When you place your order the encrypted credit card information is sent directly to one of Australia's largest banks for billing. At no point is the data sent to or stored on our server.

As none of your credit card information is stored on our server we cannot see or access your credit card information at any time.

Learn more
Return Policy: Returnable for change of mind for 400 days - up to
View all compatible Parts/Models
Compatible Parts/Models
Width
112.13 mm
Height
56.3 mm
Length
28.1 mm
Color
Black
Manufacturer
Better Batt
Capacity
1500 mAh / 1.5 Ah / 18 Wh
information-circle
Capacity
Close
It is common practice for non-OEM manufacturers to print a higher capacity on the label of their batteries. This is why some websites advertise much higher capacities. We list the REAL cell capacity of our battery, not the label capacity.
Chemistry
Ni-MH
Voltage
12.0V
There have been customer reports that this battery doesn't fit quite as well as the original Canon NP-E3. The battery will work fine but it just doesn't appear to fit the camera quite as comfortably. Here’s the solution. Remove the original plastic “head” from your old Canon battery by unscrewing the only two small screws visible on the whole battery. (If you don’t have a small enough Phillips head screwdriver, you can buy a 6-piece precision set from Dick Smith for $5). This allows the plastic assembly to come cleanly away from the battery housing. Replace the plastic housing on our battery with the original Canon housing. Now your replacement battery will fit just like the original.
SKU: BBCB-44

Description

There have been customer reports that this battery doesn't fit quite as well as the original Canon NP-E3. The battery will work fine but it just doesn't appear to fit the camera quite as comfortably. Here’s the solution. Remove the original plastic “head” from your old Canon battery by unscrewing the only two small screws visible on the whole battery. (If you don’t have a small enough Phillips head screwdriver, you can buy a 6-piece precision set from Dick Smith for $5). This allows the plastic assembly to come cleanly away from the battery housing. Replace the plastic housing on our battery with the original Canon housing. Now your replacement battery will fit just like the original.

NOTE: This does not entail “dismantling the battery”. The battery part stays intact. We’re talking about the housing only. It takes about 2 minutes to do.

Provided you do not dismantle the actual battery and only remove the head, it is still covered by our 400-day money-back guarantee. We prefer to be upfront with you so you know exactly what you are getting.

Canon EOS 1D Battery Replacement